Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.     

Underwater image quality enhancement through integrated color model with Rayleigh distribution

The physical properties of water cause light-induced degradation of underwater images. Light rapidly loses intensity as it travels in water, depending on the color spectrum wavelength. Visible light is absorbed at the longest wavelength first. Red and blue are the most and least absorbed, respectively. Underwater images with low contrast are captured due to the degradation effects of light spectrum. Therefore, the valuable information from these images cannot be fully extracted for further processing. The current study proposes a new method to improve the contrast and reduce the noise of underwater images. The proposed method integrates the modification of image histogram into two main color models, Red–Green–Blue (RGB) and Hue-Saturation-Value (HSV). In the RGB color model, the histogram of the dominant color channel (i.e., blue channel) is stretched toward the lower level, with a maximum limit of 95%, whereas the inferior color channel (i.e., red channel) is stretched toward the upper level, with a minimum limit of 5%. The color channel between the dominant and inferior color channels (i.e., green channel) is stretched to both directions within the whole dynamic range. All stretching processes in the RGB color model are shaped to follow the Rayleigh distribution. The image is converted into the HSV color model, wherein the S and V components are modified within the limit of 1% from the minimum and maximum values. Qualitative analysis reveals that the proposed method significantly enhances the image contrast, reduces the blue-green effect, and minimizes under- and over-enhanced areas in the output image. For quantitative analysis, the test with 300 underwater images shows that the proposed method produces average mean square error (MSE) and peak signal to noise ratio (PSNR) of 76.76 and 31.13, respectively, which outperform six state-of-the-art methods.     

Molecular Dynamics Study of Radial Corrugation in Carbon Nanotubes

Molecular dynamics simulations of multiwalled carbon nanotubes under hydrostatic pressure are performed to elucidate the novel class of radial buckling in the systems. It is revealed by all-atom simulations that the initial circular cross section transforms into a flower-like wavy configuration at critical pressure on the order of hundreds mega pascals or less. This kind of radial buckling, called radial corrugation, originates from the competition of the three relevant energies in the system: in-plane strain energy, van der Waals interaction energy between adjacent tubes, and out-of-plane bending energy. Their possible consequences for physical properties of carbon nanotubes are also discussed.     

Assessment of digital image correlation method in determining large scale cemented rockfill strains

A conventional contact method(using linear transducers) and a non-contact method are deployed to measure the axial and lateral deformations of large scale cylindrical cemented rockfill specimens.Experimental works incorporating two pinhole cameras to create one stereovision by digital image correlation shows that the non-contact method is as reliable for testing large cylindrical specimens as measurements done by using linear variable displacement transformer and string potentiometer. Considering this particular large specimen, the experiment resulted in the acceptable mean difference between lateral strain using both methods is 5.1 percent, and 14.5 percent for the axial strain. This occurrence is inevitable due to the heterogeneity of the concrete system and the placement of the monitoring point in digital image correlation method, although the comparison of stress-strain relationship in both methods still indicates a conformity. Based on the results of the present experiments, the authors recommend the noncontact method for a detailed investigation of the material behavior during the uniaxial compressive strength tests. Full field strain measurement enables this digital method to examine local strains near cracks at any point, a very useful tool for studying material deformation behavior.     

Digital image correlation strain measurement of thick adherend shear test specimen joined with an epoxy film adhesive

Structural bonding and bonded repairs of composite materials become more and more important. Understanding the strain within the bondline leads to suitable bonding design. For new design approaches the strain distribution within the bondline has to be analyzed. Thus, often finite element analysis (FE) are used. However, a huge challenge is the availability of reliable material properties for the adhesives and their validation. Previous work has shown that it is possible to measure the small displacements resulting within thin epoxy film adhesives using high resolution digital image correlation (DIC). In this work a 2D DIC setup with a high resolution consumer camera is used to visualize the strain distribution within the bondline over the length of the joint as well as over the adhesive thickness. Therefore, single lap joints with thick aluminum adherends according to ASTM D 5656 are manufactured and tested. Local 2D DIC strain measurements are performed and analyzed. Two different camera setups are used and compared. The evaluation provides reliable material data and enables a look insight the bondline. The results of the full field strain data measured with DIC are compared with numerical simulations. Thus, material models as well as chosen parameters for the adhesive are validated. Compared to extensometers, giving only point-wise information for fixed measuring points, the DIC allows a virtual point-wise inspection along the complete bondline. Furthermore, it allows measuring close to the bondline to reduce the influence of adherend deformation.     

Hybrid Segmentation Scheme for Skin Features Extraction Using Dermoscopy Images

Objective and quantitative assessment of skin conditions is essential for cosmeceutical studies and research on skin aging and skin regeneration. Various handcraft-based image processing methods have been proposed to evaluate skin conditions objectively, but they have unavoidable disadvantages when used to analyze skin features accurately. This study proposes a hybrid segmentation scheme consisting of Deeplab v3+ with an Inception-ResNet-v2 backbone, LightGBM, and morphological processing (MP) to overcome the shortcomings of handcraft-based approaches. First, we apply Deeplab v3+ with an Inception-ResNet-v2 backbone for pixel segmentation of skin wrinkles and cells. Then, LightGBM and MP are used to enhance the pixel segmentation quality. Finally, we determine several skin features based on the results of wrinkle and cell segmentation. Our proposed segmentation scheme achieved a mean accuracy of 0.854, mean of intersection over union of 0.749, and mean boundary F1 score of 0.852, which achieved 1.1%, 6.7%, and 14.8% improvement over the panoptic-based semantic segmentation method, respectively.     

RXDNFuse: A aggregated residual dense network for infrared and visible image fusion

This study proposes a novel unsupervised network for IR/VIS fusion task, termed as RXDNFuse, which is based on the aggregated residual dense network. In contrast to conventional fusion networks, RXDNFuse is designed as an end-to-end model that combines the structural advantages of ResNeXt and DenseNet. Hence, it overcomes the limitations of the manual and complicated design of activity-level measurement and fusion rules. Our method establishes the image fusion problem into the structure and intensity proportional maintenance problem of the IR/VIS images. Using comprehensive feature extraction and combination, RXDNFuse automatically estimates the information preservation degrees of corresponding source images, and extracts hierarchical features to achieve effective fusion. Moreover, we design two loss function strategies to optimize the similarity constraint and the network parameter training, thus further improving the quality of detailed information. We also generalize RXDNFuse to fuse images with different resolutions and RGB scale images. Extensive qualitative and quantitative evaluations reveal that our results can effectively preserve the abundant textural details and the highlighted thermal radiation information. In particular, our results form a comprehensive representation of scene information, which is more in line with the human visual perception system.     

基于洛伦兹范数的医学图像超分辨率重建研究

在超分辨率图像重建(SR)模型中,为了达到良好的重建效果,选择一个合适的代价函数是研究的重点。采用SR重建模型中的差错项选择了洛伦兹范数,正则化项选择了吉洪诺夫正则化,重建过程采用了迭代方法。提出的算法可以有效地解决医学图像SR重建过程中的去异值点和图像边缘保持的两大关键问题,达到良好的重建效果。为了验证上述算法的有效性,就一系列添加了运动模糊和不同噪声的低分辨率MRI医学图像进行了SR重建,并且与基于L2范数的重建算法的重建效果进行了比较分析。实验结果显示,所提算法具有良好的实用性和有效性。     

基于条件信息卷积生成对抗网络的图像识别

传统的图像识别方法需要大量有标签样本进行训练，且模型训练难以达到稳定。针对这些问题，结合条件生成网络和信息最大化生成网络的结构优势建立了条件信息卷积生成网络（C-Info-DCGAN）。模型增加图像的类别信息和潜在信息作为输入数据，然后利用Q网络去更好地发挥类别信息和潜在信息对训练的引导作用，并且利用深度卷积网络来加强对图像特征的提取能力。实验结果表明，该方法能够加快模型训练收敛速度，并有效提高图像识别的准确率。